NETWORKING AND INTEGRATION
April 6, 2023
ORIENT CLEAN AGENT EXTINGUISHINGSYSTEM UNITS (500 PSI SYSTEM)
April 6, 2023
INERT GAS SYSTEM
The INERGEN® Fire Suppression System, manufactured by Johnson Controls, is an engineered clean-agent system utilizing a fixed nozzle agent distribution network. The system is designed and installed in accordance with the National Fire Protection Association (NFPA) Standard 2001, Clean Agent Fire Extinguishing Systems. When properly designed, the INERGEN system will suppress surface burning fire in Class A, B, and C hazards by lowering the oxygen content below the level that supports combustion.
INERGEN® agent has also been tested by Factory Mutual (FM) for inerting capabilities. Those tests have shown that INERGEN agent, at design concentrations between 40% and 50%, has successfully inerted mixtures of propane/air, and methane/air. The system can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, ventilation control, door closures, or other auxil iary shutdown or functions. When INERGEN® agent is discharged into a room, it introduces the proper mixture of gases that will allow a person to breathe in a reduced oxygen atmosphere. A system installation and maintenance manual is available containing information on system components and procedures concerning design, operation, inspection, maintenance, and recharge. The system is installed and serviced by Authorized ANSUL Distributors that are trained by the manufacturer.
CONTACT US
Let's work together - complete the form to get started!
| IG 01 | IG 100 | IG 55 | IG 541 |
| 100 Argon | 100% Nitrogen | 50% Argon 50% Nitrogen |
50% Nitrogen 42% Argon 8% CO2 |
INERT GAS SYSTEM
The INERGEN® Fire Suppression System,
manufactured by Johnson Controls, is an
engineered clean-agent system utilizing a
fixed nozzle agent distribution network.
The system is designed and installed in
accordance with the National Fire Protection
Association (NFPA) Standard 2001,
Clean Agent Fire Extinguishing Systems.
When properly designed, the INERGEN
system will suppress surface burning fire
in Class A, B, and C hazards by lowering
the oxygen content below the level that
supports combustion.
INERGEN® agent has also been tested
by Factory Mutual (FM) for inerting
capabilities. Those tests have shown
that INERGEN agent, at design
concentrations between 40% and 50%,
has successfully inerted mixtures of
propane/air, and methane/air. The
system can be actuated by detection
and control equipment for automatic
system operation along with providing
local and remote manual operation as
needed. Accessories are used to provide
alarms, ventilation control, door closures,
or other auxil iary shutdown or functions.
When INERGEN® agent is discharged
into a room, it introduces the proper mixture
of gases that will allow a person to breathe
in a reduced oxygen atmosphere. A system
installation and maintenance manual is
available containing information on system
components and procedures concerning
design, operation, inspection, maintenance,
and recharge. The system is installed and
serviced by Authorized ANSUL Distributors
that are trained by the manufacturer.
CONTACT US
Let's work together - complete the form to get started!
| IG 01 | IG 100 | IG 55 | IG 541 |
| 100 Argon | 100% Nitrogen | 50% Argon 50% Nitrogen |
50% Nitrogen 42% Argon 8% CO2 |